|
|
|
|
|
#2
03-28-2008, 01:31 PM
|
|||
|
|||
|
Normally closed
From Alldatadiy:
The oil level is measured with a float (6) with ring magnet (7) and a contact If the engine oil level is not sufficient, the contact (arrow) opens. the vehicle ground to base plate in the instrument cluster is interrupted and the indicator light (A1e12) comes on after a time delay of 60 seconds The time delay of about 60 seconds prevents the indicator light (A1e12) coming on if the car is accelerated or braked sharply or when cornering
__________________
Chuck Taylor Falls Church VA '66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe 
|
|
#4
03-28-2008, 02:55 PM
|
|||
|
|||
|
Never done it, but that's the way I read it.
__________________
Chuck Taylor Falls Church VA '66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe
|
 |
| Bookmarks |
|
|
W140 Sensors testing
Linear Mode
