Cruise control not working 1989 190 E 2.6
The cuise on this can has not worked since I owed it (about 4 years). I see and hear nothing when tripping the lever.
I have read various posts here for other modesl. I see reference to an AMP, the acutator, and for a place that rebuilds them called GDL. I know little about these parts, where they are located, etc. I'd appreciate some direction on where to look and how to work on this problem. Thanks. Dan |
The problem could be weak solder points in the cruise control computer. Re-flowing these solder points is usually the fix. An easy way to diagnose this is to swap in a known good computer to see if the cruise control suddenly works.
|
Check fuse #5.................
|
All times are GMT -4. The time now is 04:33 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website