|
|
|
|
|
#1
04-04-2008, 07:13 PM
|
||||
|
||||
|
Buzzing Turn Signal W126 500Se (82)
W126 1982 500SE (euro)
Activation of turn signal causes a buzzing behind cluster - Signal light remains (solid) illuminated. I replaced the sometimes troublesome hazzard switch from a known good 126 - notta Anyone have any ideas on what the problem might be? Thanks John in Mississippi
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) 
|
|
#2
04-04-2008, 08:49 PM
|
||||
|
||||
|
Yep. Its the flasher relay, located...you guessed it- behind the instrument cluster.
__________________
 1980 500SE/AMG Euro 1981 500SEL Euro 1982 380SEL 1983 300TD 1983 500SEC/AMG Euro 1984 500SEC 1984 300TD Euro 1986 190E 2.3-16 1986 190E 2.3 1987 300D 1997 C36 AMG 2003 C320T 4matic past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350
|
|
#3
04-04-2008, 09:41 PM
|
||||
|
||||
|
Quote:
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o)
|
|
#4
04-05-2008, 02:03 PM
|
||||
|
||||
|
I agree. On the older switches, which combine the relay & switch in one unit, you can cause this buzzing by not pushing in the switch completely. So if you don't have access to a new part, I would try cleaning the inside of both parts, in your case, as it is a matter of bad contacts.
__________________
 Don't Chrome them; polish them
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
