PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   w126 gen 2 differential to gen 1 (http://www.peachparts.com/shopforum/tech-help/219824-w126-gen-2-differential-gen-1-a.html)

JTY 04-18-2008 07:00 AM
w126 gen 2 differential to gen 1
 
Is it possible to convert gen 1 differential to gen 2
I know that the subframe is different and also the axels and lca
My main concern is the upper mount point for diff, on gen2 ASD the location is different ?

mbdoc 04-18-2008 07:58 AM
Don't think there was any "frame" changes on that support area.

babymog 04-18-2008 10:41 AM
Why do you want to do that? Just curious.

JTY 04-18-2008 06:16 PM
Quote:
Originally Posted by M.B.DOC (Post 1828083)
Don't think there was any "frame" changes on that support area.
Are you sure, here you can see a 560SEL rearend and the rear rubber mount is on the left side of diff:
http://schloerb.smugmug.com/gallery/4144397_q4k8W#241895933_jDmeR-A-LB

On my gen1 300SD it's in middle and also on our gen2 500SEC, either this is only problem with ASD diff or a 560SEL difference (as my 300SD is withoud LSD and 500SEC is with LSD).


All times are GMT -4. The time now is 04:09 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website