PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   91 300CE door panel rmvl (http://www.peachparts.com/shopforum/tech-help/220934-91-300ce-door-panel-rmvl.html)

pantherpaw 04-30-2008 02:25 PM
91 300CE door panel rmvl
 
I need to work on my window moter/etc. inside the drivers door...What is the proper way to remove the door panels/trim/etc. to access the area?
Any special tools required?

Pete Geither 04-30-2008 03:05 PM
Try this,
http://www.peachparts.com/shopforum/tech-help/155585-94-w124-door-panel-removal-door-check-replacement-map-pocket-fix-diy.html?highlight=door+panel+removal
and don't be afraid to use the search.:D

pantherpaw 04-30-2008 03:11 PM
Thanks
 
Quote:
Originally Posted by Pete Geither (Post 1840203)

I appreciate it...My internet skills gernerally suck...but, I CAN do calculus...http://www.peachparts.com/shopforum/...cons/icon7.gif

blueeagle289 05-01-2008 08:17 AM
Door panel removal - 300CE
 
I have taken off my door panels to install new door "holders" and it really is not too difficult.
You just start from the top right and remove or unscrew each segment of the door supports, handles, arm rest etc etc. A tedious job, but not really too hard when you know what to work on.

The Mercedes 300CE door hangs on the top rail of the door instead of being attached with studs around the perimeter, which is really better when you get used to it.

BC

pantherpaw 05-01-2008 08:30 AM
Quote:
Originally Posted by blueeagle289 (Post 1840840)
I have taken off my door panels to install new door "holders" and it really is not too difficult.
You just start from the top right and remove or unscrew each segment of the door supports, handles, arm rest etc etc. A tedious job, but not really too hard when you know what to work on.

The Mercedes 300CE door hangs on the top rail of the door instead of being attached with studs around the perimeter, which is really better when you get used to it.

BC

Yes, I noticed several differences, in the write up and photos, because the CE being a coupe has a much larger door and more trim peices...I was glad to get your response, for its better to talk to someone who has actually performed the panel removal on an actual Coupe model door...I'm probably going to start the job on Saturday, so that I have plenty of time to take my time...stand by for possible questions...thanks


All times are GMT -4. The time now is 04:36 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website