PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   97 s420 no power with petal to floor and knocking (http://www.peachparts.com/shopforum/tech-help/225229-97-s420-no-power-petal-floor-knocking.html)

atv087 06-16-2008 08:29 PM

97 s420 no power with petal to floor and knocking
 
started something over at benzworld forums but was sent here . heres what i have so far http://www.benzworld.org/forums/w140-s-class/1381467-97-s420-no-power-petal-floor-knocking.html

today i recieved word from the dealer saying that they need to tear down the whole engine and find the cause of cylinder 4 having no compression. also they said cylinder 4 not having any compression caused the other 3 cylinders on the passenger side bank to have a missfire which makes no sence. im pickin up the car from the dealer in the morning to start tearing it down myself hopefully you guys can help me figure out the cause. also i changed the oil and there was no metal shavings or even flakes so i doubt its a rod knock. any ideas would be greatly appriciated due to me getting stuck with this 5700$ car that doesnt run and i cant drive it.

Thanks :)

atv087 06-16-2008 08:56 PM

also exhaust glows red hot after 2 or 3 minutes of the car running and the car will not rev past 4500 rpms could it be clogged cats ??

atv087 06-16-2008 10:03 PM

ok i now believe after some research that the exhaust was glowing red hot due to the car being at high revs. what will cause cylinders 1-4 to misfire and the check engine light to flash and then stay solid. i have 55 pounds of fuel pressure and all new coils , spark plugs and plug connectors. its a 97 so its not a wiring harness issue. any ideas would be great

THANKS AGAIN

atv087 06-17-2008 02:31 PM

bump

DJet Tragic 08-20-2008 05:50 AM

Very similar noise to your engine - see oleg455 YouTube
 
I looked your YouTube clip then at another one posted by oleg455

It had a very similar noise to your engine

He said it was " It was broken oil guides"

see:

http://www.youtube.com/watch?v=a4FIoDfOsxA


All times are GMT -4. The time now is 01:32 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website