201 16v front control arms
 

Does anyone know the differance between the normal 201 control arm and the 16v type?, are they a different length to work with the lower ride height or are they just stronger?.
Would they offer any improvment on a lowered 201?
Thanks for your help Linds UK

They are all the same, only the bushings are different!! That is why there are 3 different part numbers fot 190 control arms! My race car has only 5" of clearance at the rocker panel, not the lower skirt that is only 3.5" from the ground. Why do need them to be lower? BUMP steer problem or what?

Hi thanks for the reply, I have replaced every bush on the car apart from the control arm bushes , my car as Eibach springs and I pressumed that the 16v arms may be shorter [ to enable the correct camber with lower ride height] or stiffer/ reenforced?,
so it looks like I was wrong, so I should just fit new 16v type bushes to my original arms?. Why are there three types of control arm?
My car is about to have a alignment check and i want to get this all done beforehand, it is fitted with a sportline antisway bar and 215/45x17 tyres but still feels vague around straight ahead and slow to turn in. Iam hoping the alignment cures some of these faults. Is the 16v steering box worth fitting or am i chasing the wild goose once again?
Thanks again Linds UK