Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-28-2001, 06:30 PM
Joe-1
Guest
 
Posts: n/a
Recirc door on a 201 16 valve

Where is the recirc door on the 190 class? How can you check to see if it is opening/closing properly? Can an adjustment be made to close this recirc door completely? My mechanic says that the door is set to 35% fresh air at all times. Please advise. Joe

Reply With Quote
  #2  
Old 08-28-2001, 07:04 PM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
The fresh air door is at the bottom of the heater box! Behind the ash tray by about 18". The door is 100% open in the fresh air(no a/c) mode & also in any heating mode. It is 80% closed in the normal A/C mode & will close 100% in max A/C. There are 2 vacuum lines that control operation!!

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wagon rear suspension valve rebuild lrg Diesel Discussion 11 10-04-2006 06:02 AM
380 Idle Control Valve Test ctaylor738 Tech Help 5 01-23-2004 01:33 PM
Vacuum Pump & Check Valve Woes rob_frick Diesel Discussion 5 08-15-2002 09:52 PM
Help. Setting Valve Clearances always did confuse me.... Carrameow Tech Help 5 09-07-2001 11:22 AM
1985 300D expansion valve question engatwork Tech Help 8 08-13-2001 07:18 AM



All times are GMT -4. The time now is 06:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page