![]() |
|
|
|
#1
|
||||
|
||||
560 SEC suspension
I had my hydraulic suspension fixed last week in a Mercedes dealer. The system was loosing its oil from a bad hose.
The rear of the car is higher now and I am wondering if the hight can be ajusted on those suspension. I also feel that the suspension is too hard...bouncing feeling on bad pavement. Any suggestion? bests regards Christian |
#2
|
||||
|
||||
There is a position valve on the rear suspension with a link that is similar to a sway bar link except that its adjustable. Ride height can be adjusted there, I believe.
They may have fixed the leak but bouncing may indicate bad accumulator spheres. Tom W
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual. ![]() ..I also have a 427 Cobra replica with an aluminum chassis. |
#3
|
||||
|
||||
Thank you very much for the information
bests regards Christian |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|