PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   W126 upper control arm torque... (http://www.peachparts.com/shopforum/tech-help/228058-w126-upper-control-arm-torque.html)

Hit Man X 07-19-2008 01:07 AM
W126 upper control arm torque...
 
Can anyone out there tell me the torque specs for the upper arm to the body, the ball joint to spindle, and the sway bar to the arm?

Thanks

Johnhef 07-19-2008 10:32 AM
Just did mine last night-
upper arm to body: 19mm socket on 1/2" impact and 19mm wrench...
ball joint to spindle and the sway bar to the arm: 17mm socket on 3/8" air ratchet...

done to german torque spec: gutentight ;)

Hit Man X 07-19-2008 10:37 PM
lol, I found the specs finally:



hex bolt upper control arm bearing to front end - 80 Nm

hex bolt of upper control arm support to torsion bar - 65 Nm

hex nut of guide joint - 40 Nm

Johnhef 07-20-2008 01:59 AM
yeah well.. I guess if ya want to get technical...

Hit Man X 07-20-2008 03:18 AM
That's the only way. ;)


All times are GMT -4. The time now is 04:06 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website