420SE Sunroof Cable Mangled!
:eek: DOH!! I have always had a problem with my sunroof not tilting up properly, it does (or did) slide back and forth very smoothly though. It got stuck on a slight tilt at the weekend, and I finally got it to close by jumping up and down on the roof.
Any way, I checked the motor and cable in the trunk, and two things have happened. 1] the bronze color tube that I assume encases the cable has come loose and is sitting in the bottom of the trunk. 2] The spring around the cable has been totally chewed up for a total length of about 2 inches, about 8 inches or so from the very end. I can now only slide the sunroof back, which still works OK, when I want it to return, it will not tilt back up to be flush with the roof, instead I have to actually press the button upward in order for it to return to the normal position. Anybody got a good idea on what I can do to make things right ? BTW. I have only had the car for a month, and it is my first Merc ever, so go easy on me with the technical words. I must say how damned impressed I am with all of the posts here and the site in general, this has to go down as one of the best, and most useful sites I have ever encountered! |
All times are GMT -4. The time now is 09:17 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website