|
|
|
|
|
#16
09-07-2008, 03:03 AM
|
|||
|
|||
|
hit 120 @ 5500 smooth as ever
|
|
#17
09-07-2008, 03:33 AM
|
||||
|
||||
What's the big deal about ordering proper BP5EFS plugs online for a few dollars each?
 Just get 12-18 so you have some spares.I have had my 300sel to ~114mph on a stock ignition system with the proper plugs, so I don't understand the purpose of replacing all the bits as shown. To each their own.
__________________
I'm not a doctor, but I'll have a look.  '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]
|
|
#18
09-07-2008, 11:51 PM
|
|||
|
|||
|
Quote:
(1) resistor plugs (2)platinum plugs Both supposedly No No for M103
__________________
Tom 2010 C250 4-matic Sport (Canada)
|
|
#19
09-08-2008, 10:39 AM
|
|||
|
|||
|
He was told.................
__________________
A Dalton
|
|
#20
09-08-2008, 01:12 PM
|
|||
|
|||
|
only place cld find bp5s on a UK website, sparkplugs.com doesnt even have them
new wires are non resistor so R plugs r fine why are platinum plugs bad? idt the car knows if copper or platinum or iriidium is lighting it up
|
|
#21
09-08-2008, 04:35 PM
|
||||
|
||||
|
Quote:
1. You don't know how to shop, they're easy to find. 2. Doesn't have proper resistance like that, I checked into it. 3. Factory called for copper, non-resistor. Anything else is wrong.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]
|
|
#22
09-16-2008, 07:57 PM
|
|||
|
|||
|
500 SEC coil change
I have a 1984 500 SEC can I use a MSD coil and does my stock coil have a resister, in other words do I have to worry about ruining my car with a Accel coil or MSD?
|
|
#23
09-16-2008, 08:59 PM
|
|||
|
|||
|
the blaster ss coil is .3 ohm , if you dont have a current limiting ign ( i think , and other ppl on here have said the stock 300e is) msd suggests an inline resistor
dont hold ur breath emailing msd tech, i still never got an answer from a month ago worth noting, my tach works fine w MSD coil PS mSD coils made in china, if i knew that i wldve prob gone w jacobs or something US made ...
|
|
#24
11-19-2008, 09:34 AM
|
||||
|
||||
|
Quote:
__________________
Regards Warren Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL ENTER > = (HP RPN) Not part of the in-crowd since 1952.
|
 |
| Bookmarks |
|
|
Linear Mode
