![]() |
How do I change a thermostat
How do I change thermostat on a 86 420 sel
|
drain coolant,
remove thermostat housing, its located at the end of the lower radiator hose, where it goes into the block (three screws, 10mm) remove old thermostat install new thermostat (be sure the O-ring gasket is seated) Renew coolant |
Thank You I will look tomorrow when wife brings the car home. After i install a new intake on one of the Lincolns
|
dont forgot to drain the coolant in the block by pulling plug on the bllock
|
All times are GMT -4. The time now is 12:16 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website