Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 09-10-2001, 02:41 AM
Registered User
Join Date: Mar 2001
Location: Sydney Australia
Posts: 23
Question 380sel throttle switch

How do you know when the throttle switch is not working.
I tried disconnecting the 2 pin connector to the switch while the engine is running and noticed the idle rpm remain the same.

Also, is it possible to bypass the idle speed control unit electrically besides applying restriction on the idle control valve?

I asked this because I noticed that with my idle control unit disconnected, there's still current going into my idle control valve and when I pulled the 2 pin connector out from the idle control valve, the rpm surged to 1500 (900rpm when connected).

I am not sure if I should replace the idle control unit first not knowing if the one in my car is still working or not.

There is no any restriction in the idle control valve anymore but the rpm is still doing 900 with the idle control unit disconnected, and 1500rpm with the 2 pin connector to the idle control valve disconnected.

Pls bear with me, Steve and all who are able to help me out again.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
85 MB 300 DT - Power window switch Dcheng Tech Help 7 04-23-2007 03:43 PM
1986 420SEL Hazard light switch rkphoto Tech Help 5 01-06-2004 02:04 PM
Console window switch ED C. Tech Help 4 11-18-2003 12:34 PM
Erractic idle (16V). Anyone replaced a throttle body due to wear? Tinker Tech Help 2 08-25-2002 08:01 AM
Throttle Position Switch Steve190E 2.3 Tech Help 2 04-16-2002 08:14 AM

All times are GMT -4. The time now is 06:18 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page