|
|
|
#1
|
|||
|
|||
crank pulley bolt
To remove crank pulley bolt on SL280, is it left or right hand thread?
Or is it just hard to move because of high torque setting? |
#2
|
|||
|
|||
Normal, RH thread. Very tight. What year?
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
1999 model.
|
#4
|
|||
|
|||
The M112 engine uses a "stretch" bolt. Basic torque then a 90deg rotation.
Very tough to remove w/o special tool to counter hold crankshaft pulley!
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
|
|