Wheel Alignment Specs for the 560SL
Does anyone have the wheel alignment specs for a 1986 560SL. They do not appear to be in the chassis manual.
|
Should be in group 40.
|
This is a joke right. In the replacement of the drag link section it says to refer to section 40.320 but bot my CD and paper manuals only go up to 40.113
??? |
they want you to take it to the dealer... lol
|
Quote:
AlignmentSpecs.com $8.00 for 1 shot |
Doesn't the alignment machine you are using have specs? Mine all have had them. From memory 9-9.5 degrees of caster, -.25 to-.5 camber and 3mm +or- 1mm toe would work just fine. Leave a quarter less caster on the left and a quarter more camber. The rear isn't adjustable so even camber and a few mm toe in with a thrust angle less than .1 deg will have to do.
|
Quote:
The alignment machine I have is a digital inclenometer. What I got for $8.00 from alignmentspecs.com Caster 10.25 +/- .5° Camber -0.17 + 0.17 -0.33 (Yes I did pay $8.00 to get 3 numbers for camber) I assumed it meant get 0 +/- 0.17 and -.33 is for the rear Toe 0.33° +/- 0.17° or 0.17" +/- 0.08" |
All times are GMT -4. The time now is 06:59 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website