|
|
|
#1
|
|||
|
|||
Wheel Alignment Specs for the 560SL
Does anyone have the wheel alignment specs for a 1986 560SL. They do not appear to be in the chassis manual.
__________________
To see my 129 parts for sale visit: http://stores.ebay.com/The-Mercedes-SL-Store John Roncallo |
#2
|
|||
|
|||
Should be in group 40.
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician |
#3
|
|||
|
|||
This is a joke right. In the replacement of the drag link section it says to refer to section 40.320 but bot my CD and paper manuals only go up to 40.113
???
__________________
To see my 129 parts for sale visit: http://stores.ebay.com/The-Mercedes-SL-Store John Roncallo |
#4
|
||||
|
||||
they want you to take it to the dealer... lol
|
#5
|
|||
|
|||
Yeah
AlignmentSpecs.com $8.00 for 1 shot
__________________
To see my 129 parts for sale visit: http://stores.ebay.com/The-Mercedes-SL-Store John Roncallo |
#6
|
|||
|
|||
Doesn't the alignment machine you are using have specs? Mine all have had them. From memory 9-9.5 degrees of caster, -.25 to-.5 camber and 3mm +or- 1mm toe would work just fine. Leave a quarter less caster on the left and a quarter more camber. The rear isn't adjustable so even camber and a few mm toe in with a thrust angle less than .1 deg will have to do.
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician |
#7
|
|||
|
|||
Quote:
The alignment machine I have is a digital inclenometer. What I got for $8.00 from alignmentspecs.com Caster 10.25 +/- .5° Camber -0.17 + 0.17 -0.33 (Yes I did pay $8.00 to get 3 numbers for camber) I assumed it meant get 0 +/- 0.17 and -.33 is for the rear Toe 0.33° +/- 0.17° or 0.17" +/- 0.08"
__________________
To see my 129 parts for sale visit: http://stores.ebay.com/The-Mercedes-SL-Store John Roncallo |
Bookmarks |
|
|