|
|
|
|
|
#1
10-03-2008, 01:52 PM
|
|||
|
|||
|
2000 C230 Shifter hard to move
The shifter in my 2000 C230 has become more difficult to move from Park into any other position. It seems as though there is much more pressure on it than I was used to. This may have been a gradual change but it is much harder to move from gear to gear now. I see four screws holding the shift assembly on to the top of the transmission is it that simple to remove or am I going to regret removing it that way? Anyone with a little knowledge of how this works that can explain it to me?
__________________
Dave 88 300E 250K Sold 2000 C230K Totaled @104K  2003 ML320 156K Sold 2009 E350 4Matic Sport 46K Sold 2011 ML350 60K Sold 2014 GLK350 46k 2012 GL450 55K 
|
|
#2
10-03-2008, 02:37 PM
|
|||
|
|||
|
Take a look at your shifter bushing under the car. Connects linkage to shifter.
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.)
|
|
#3
10-03-2008, 08:27 PM
|
||||
|
||||
|
+1 on the bushings and you better hope that's it, as the 2000 and up the shifters are "modules" and I don't think there is anything replaceable in there. Of course ingenuity might find a cure, for example removing it and seeing if you can find a place to lube it.
Gilly
__________________
Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)
|
 |
| Bookmarks |
|
|
Linear Mode
