Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-15-2008, 10:51 AM
RES RES is offline
Registered User
 
Join Date: Jan 2003
Location: Trumbull, Connecticut
Posts: 52
Dumb Question-2004 C230

I assume you can remove the top engine cover, the one with the silver Mercedes inset by just pulling it off. I do not see any fasteners holding it on, but it does not seem to come off very easily. Is there a method to remove it without damaging it?

Reply With Quote
  #2  
Old 10-15-2008, 11:33 AM
slk230red's Avatar
WECO Installer
 
Join Date: Jul 2006
Location: Tampa, FL
Posts: 819
As I recall, I just slightly pulled out on the sides and pulled up to remove it.
__________________

1993 190E 2.3
2001 SLK230
1971 LS5 (454) Corvette Convertible
Reply With Quote
  #3  
Old 10-15-2008, 10:58 PM
RES RES is offline
Registered User
 
Join Date: Jan 2003
Location: Trumbull, Connecticut
Posts: 52
It took quite a bit of force, more than I expected to use, but it did come off. The bottom of the cover has four slender plastic rods with ball shapes at the ends about an inch long and about 3/16" in diameter that extend from the bottom of the cover slightly inboard at four locations. The cover with its four rods at the bottom presses into four rubber receiving mounts with holes in their centers. You line up these four mounting points and press the cover down until it locks into place. I put a little silicon grease on each of them to make it easier to remove in the future.

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:49 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page