89 190E 2.6 A/C bracket - Can't get it off!
 

I've removed the head from the engine and want to get the block out. I just have to take the A/C compressor and the bracket off and I can remove the block.

I've removed the two bolts on the right side and the socket head bolt on the left about mid way down. I can't see any other bolt. Am I missing something?

There are bolts behind the compressor. You will have to take out the 4 bolts that hold on the compressor and the bolts that hold on the manifold hose. The compressor will lay to one side then the engine should be able to taken out.

D***! That was the one thing I was hoping it wasn't. There's not much room there to move anything around. But if I have to, I have to.

Thanks.