|
|
|
#1
|
|||
|
|||
126 no heat...also brake ???'s
I am up in Canada and it is staring to get a little cool. Turned on the heat in my 87 560sel for the first time in a while and it did not work. The blower motor is running fine as is the AC. When I turn the temp dial down from the blue to the red, the AC shuts off, the fan keeps blowing but no heat comes out.
As well, when I come to a stop my abs light starts to flicker and the braking at a slow speed pulsates really hard. I can't feel any pulsating in the brake pedal. If I am completely stopped and press down hard on the brake pedal the abs light will come on solid. Could this be my abs sensors or a rotor issue? Any help would be great as it will be cold and icy soon. The Dude. |
#2
|
||||
|
||||
Not sure on the brakes but check your mono valve for the heat. Pull the valve and see if the rubber diaphragm is split. You can buy a new rebuild kit from this site or go to a junk yard and see what you can see.
__________________
If it ain't broke take it apart and find out why. 1983 300SD, 4 speed 1994 C280 1987 300TD wagon 1996 HD Road King Ride in Peace Eric Peterson, Harley of Macon |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|