|
|
|
|
|
#1
07-07-2008, 10:51 PM
|
|||
|
|||
|
190E - Swaping Standard for Euro Lights
Hi All,
Just picked up a pair of Bosch Euro headlights for my 1992 190E 2.6. Looked under the hood and it doesn't look like a simple swap. Can anyone tell me if there is special installation required? The connectors don't even seem to match and I guess that makes sense since they are Euro headlights. If I can get some tips for installation that would be great. Thanks, -D Last edited by higher planes; 07-07-2008 at 10:56 PM. 
|
|
#2
07-08-2008, 02:55 AM
|
||||
|
||||
|
Doing a search will reveal all. It is a bolt to bolt, screw to screw swap, except for the wiring connector. You will need to get the 6 pin connector block, which is the same part as the wiring connector for the tail lights.
qty (2) - 006 545 80 28 - six-pin electrical connector, socket qty (2) - 009 545 30 28 - six-pin electrical connector, cover To wire the City Lights to the front driving lights: Low wattage soldering iron & solder Wire stripper and cutter Approx. 24 inches of 12-16 gauge stranded automotive wire qty (2) - 003 545 26 26 - pin, connector qty (2) snap type wire splices
|
|
#3
07-08-2008, 10:45 AM
|
||||
|
||||
|
Quote:
Connect the city light pigtail to the parking light feed wire on the turn signal lens socket. Jim
__________________
14 E250 BlueTEC black. 45k miles 95 E320 Cabriolet Emerald green 66k miles 94 E320 Cabriolet Emerald green 152k miles 85 300TD 4 spd man, euro bumpers and lights, 15" Pentas dark blue 274k miles
|
|
#4
07-08-2008, 01:36 PM
|
|||
|
|||
|
higher planes,
If I may ask, where did your purchase the Bosch lamps for your 190.
__________________
Paul
|
|
#5
12-31-2008, 01:12 PM
|
|||
|
|||
|
Quote:
Sorry, I know this is old, but I picked them up on ebay for $200. Swap was done and they look great.
|
 |
| Bookmarks |
|
|
Linear Mode
