1985 500SEL idle control module
Is there / does anyone have, a schematic for a 1985 W126 V8 idle control module? Mine appears to have some issue and I'd like to trouble shoot it instead of taking it apart again and again. It's either a flaky component or a bad solder connection. All the solder connections appear to be ok. So I'm thinking a flaky component. Or should I just run the all the solder connections on the board? Heck, even a wiring diagram showing the connections to the module from the vehicle harness would be of benefit.
Karl M. |
I'd resolder just the main connections to the pins. That has worked for others in the past.
Sorry i don't have the schematics. |
All times are GMT -4. The time now is 03:40 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website