PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Buying a W210...430 and a joke... (http://www.peachparts.com/shopforum/tech-help/240825-buying-w210-430-joke.html)

BOMC 12-21-2008 08:51 PM

Buying a W210...430 and a joke...
 
Can someone comment on known issues and peculiarities of the E430. What can I expect when buying one with 80K miles?

I will probably buy one soon and spend 12 to 15K. What will I be getting into with this?

Currently I have an 87 300D turbo which makes me well understood of W124 engineering. I've owned this diesel 6 years and my worst non-accessory issue was a failed glowplug in my first month of ownership.

(joke) How does a Mercedes Benz die? One accessory at a time...:rolleyes:

sdpartz 12-21-2008 10:31 PM

Joke
 
LOL! I like that "one accesory at a time" :D

I usually hear the BMW "bring my wallet", the Ford "fix or replace daily" & Fiat's "fix it again Tony"

Now I have to keep an eye on all my accesories :(

97 C230
95 C220
94 C280
98 ML320

Pete Geither 12-22-2008 05:57 AM

I just bought a 210 last week, and since you are from New Jersey, if you buy a local car, pay close attention to rust. I found one from the Cleveland area and did notice some rust which figured into the price we negotiated. I brought it straight to the shop and pulled the bumpers and rocker panel mouldings off and found quite a bit more rust than I ever imagined. It is a good thing I addressed it now rather than in the spring as it would have gotten MUCH worse by then. Always remember,,, any rust you see peeking around mouldings or bumpers is probably just the tip of the iceberg. It also has a leaking tranny that I still have to address. The car only has 62 K on it so I do expect to get some serious service out of it yet. How it will compare to my 95 ?,,,, time will tell. I really wanted the heated seats and memory seats.

Ferdman 12-22-2008 08:30 AM

Mike, have a PPI (pre-purchase inspection) done by a MB-trained tech so you know exactly what you're buying. A knowledgeable tech will know the trouble spots to focus on with any particular year and model MB automobile. I would avoid buying any car with rust issues. It will only get worse and is difficult/impossible and expensive to treat.

mbdoc 12-22-2008 08:49 AM

The "rusted" spring perch issue is a real problem UP north. Have that area inspected closely on a PPI.

I would look for a "southern" car for sure. We have very little salt that causes that issue.

The last of the W210's had very few problems.....2001-02.

tinypanzer 12-22-2008 09:39 PM

How's about this one -

What's the difference between a Mercedes and a porcupine?

- The porcupine has the pricks on the outside......

babymog 12-22-2008 09:47 PM

I've heard this one before, ... but it was a sorority girl.

Quote:

Originally Posted by tinypanzer (Post 2057358)
How's about this one -

What's the difference between a Mercedes and a porcupine?

- The porcupine has the pricks on the outside......


ROGER E. 12-24-2008 11:29 PM

W210
 
Quote:

Originally Posted by BOMC (Post 2056414)
Can someone comment on known issues and peculiarities of the E430. What can I expect when buying one with 80K miles?

I will probably buy one soon and spend 12 to 15K. What will I be getting into with this?

Currently I have an 87 300D turbo which makes me well understood of W124 engineering. I've owned this diesel 6 years and my worst non-accessory issue was a failed glowplug in my first month of ownership.

(joke) How does a Mercedes Benz die? One accessory at a time...:rolleyes:

RUST. W210s are having big problems with this. When an upper spring perch breaks away it will ruin your entire day. Not to mention your VISA limit.


All times are GMT -4. The time now is 05:28 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website