![]() |
W140 Duovalve or Temp Sensor
The heat stopped working on the passenger side of my '98 S420. I ran the diagnostics and found the temperature (4) on the right side heater core to be about the same as the ambient while the left side (3) displayed heated coolant. Unfortunately it would appear that the duovalve has failed, however, in running the trouble codes for the system though no code was thrown for a failed duovalve (B1418) also I checked continuity for the coils as suggested by the "V12 uber alles" rebuild instructions and found it to be ok.
Before parting with $500 to replace, I would love to check the temperature sensor operation first. Where would I find said sensors. The overhead cabin pump sensor is fine but I just can't fine the heater core sensors. Any help would be appreciated. Steve |
Check out this website. It has good schematics of your car. http://www.detali.ru/cat/oem_mb1.asp?TP=1&F=140070&VIN
|
All times are GMT -4. The time now is 11:11 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website