|
|
|
|
|
#16
02-19-2009, 05:38 PM
|
|||
|
|||
|
Quote:
That's my german accent. ummmmm, not entirely sure i know of this bushing. http://epc.startekinfo.com/epc/login.jsp You might buy this $12 a year subscription to the MB online parts catalogue, it totally rocks and you can use your vin to find the exact part...
__________________
Mark ======== THE WHITE FLEET 2016 GLE300d 4-MATIC 38K BROWN! 2012 S350 Bluetec==94k WHITE 2007 ML320 CDI==166K WHITE (FOR SALE) Under new management: 2005 E320 CDI--140K--WHITE 1995 E300-Diesel-133.5K--THE CAR IS BLUE 1986 300SL--97.5K (European) AND WHITE. Back in Europe! 1991 190E 2.3-73K California Perfect.--WHITE 1995 E320-Wagon-159K--WHITE (recently scrapped) 1987 300D Turbo-213K--WHITE 1987 190D 2.5 Turbo-288K--WHITE 
|
|
#17
02-19-2009, 05:42 PM
|
|||
|
|||
|
Is it on the inside? There is an optional "dirty environment" seal that could be installed, it 's an option, in fact there are non in the states only germany right now. Unless you're mud running, it's not needed.
__________________
Mark ======== THE WHITE FLEET 2016 GLE300d 4-MATIC 38K BROWN! 2012 S350 Bluetec==94k WHITE 2007 ML320 CDI==166K WHITE (FOR SALE) Under new management: 2005 E320 CDI--140K--WHITE 1995 E300-Diesel-133.5K--THE CAR IS BLUE 1986 300SL--97.5K (European) AND WHITE. Back in Europe! 1991 190E 2.3-73K California Perfect.--WHITE 1995 E320-Wagon-159K--WHITE (recently scrapped) 1987 300D Turbo-213K--WHITE 1987 190D 2.5 Turbo-288K--WHITE
|
|
#18
02-19-2009, 05:46 PM
|
|||
|
|||
|
I called up the local parts guy, he will have one at 10AM tomorrow.
__________________
1986 190D, 2.5L, 5-speed swap, 180,000 Miles (60K by me). Jeep CJ-7 with Cummins 4BT/NV4500/AtlastII 4.3. Grand Wagoneer 4BT project in progress!
|
|
#19
02-19-2009, 06:00 PM
|
|||
|
|||
|
Quote:
 It looks like it has to be pushed away from the camera for removal. Getting it back in looks difficult, as another part of the carrier is partially obstructing directly above the side it will be pressed back in from.  
__________________
1986 190D, 2.5L, 5-speed swap, 180,000 Miles (60K by me). Jeep CJ-7 with Cummins 4BT/NV4500/AtlastII 4.3. Grand Wagoneer 4BT project in progress! Last edited by DieselCJ; 02-19-2009 at 06:10 PM.
|
|
#20
02-19-2009, 08:39 PM
|
|||
|
|||
|
I found this page, I will try to make a tool similar to what is shown out of sockets and a bolt.
124 carrier bushing R&R
__________________
1986 190D, 2.5L, 5-speed swap, 180,000 Miles (60K by me). Jeep CJ-7 with Cummins 4BT/NV4500/AtlastII 4.3. Grand Wagoneer 4BT project in progress!
|
|
#21
02-20-2009, 05:21 PM
|
|||
|
|||
|
Thanks for the help everybody.
 All pressed together very nicely, the hardest thing was getting the damn parking brake parts together.  In the spring I will do the other side. Pressing bearing into carrier:  Install clip and dust shield:  Slice old race and crack with chisel:  Press hub into bearing:  Done:  Pitted race: 
__________________
1986 190D, 2.5L, 5-speed swap, 180,000 Miles (60K by me). Jeep CJ-7 with Cummins 4BT/NV4500/AtlastII 4.3. Grand Wagoneer 4BT project in progress!
|
 |
| Bookmarks |
|
|
Linear Mode
