ETR switch climate control 1983 300 SD. problem
I have a problem with compressor not ingauging. I have traced electrial to the ETR switch and have 12V at tirminal #1 . No power to tirminal #2. If I jump across 1 to 2 the relay and compressor ingauge and A C will cool. Can you check the ETR switch adjustments ? Do not want to buy a new ETR switch if It will not fix my problem.
|
go buy one it will fix your problem.
|
Thanks for your reply. I like your tag. I was a Master Tech but am retired and sometimes have problem understanding MB problems. apriciate your input. I will try a new ETR. Thanks again.
|
All times are GMT -4. The time now is 10:35 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website