![]() |
Neither.
|
Quote:
|
103 plugs
This engine takes non resister plugs H9DCO Bosch available att the dealer or the NGK non resister plugs. other type of plugs will leave the engine with a low performance. The spark plug end connector covers do become conductive over a period causing a slight miss ,readily checked by the corona discharge ring on the plug porclean .
mak 300se |
Thanks to everyone for the great recommendations. It sounds like I should put in a good top cleaner into the car and then change the oil and run it for a while to see if the intake and exhaust valve problem resolves. If not, it sounds like I need to remove the head and do a valve job.
Any recommendation on a good shop manual for this car? What is GM top end cleaner mentioned above and where can I buy it? Thanks. |
All times are GMT -4. The time now is 02:14 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website