PeachParts Mercedes-Benz Forum - Any fix for a self destructed ignition lock?

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)

- Tech Help (http://www.peachparts.com/shopforum/tech-help/)

- - Any fix for a self destructed ignition lock? (http://www.peachparts.com/shopforum/tech-help/246247-any-fix-self-destructed-ignition-lock.html)

Any fix for a self destructed ignition lock?

Ok, MB Doc mentions the self destruction here: http://www.peachparts.com/shopforum/tech-help/193748-new-ignition-lock-w124-%93locked-up%94.html

And ********az warns:

Quote:

Mercedes (OE)
Ignition Lock Housing; Without Key and Tumbler
This item is easily damaged by improper installation - proper factory tools and techniques are required. Do not turn lock mechanism before installing unit and key/tumbler. This cannot be reset in the field. Part cannot be returned if locked from tampering before installation, factory charges time and freight to reset. 1 per car.

[IMG]http://www.***************/secure/PartImages/1244623530.jpg[/IMG]

What do the factory tools look like and has anyone fixed this "in the field?" I'm curious to know how to take it apart...

If anyone has a good cheap housing (90+) let me know...

no one has done this?? :confused:

anyone have "bad" assemblies to donate?

I found out how to disassemble it but not before destroying a plastic part next to the cam. I tried to pull it through the cylinder thinking it springs open. Since I doubt I can buy that part, the assembly will be spare parts until I find another to try assembly...;)