Hey Arthur Dalton,
gschira here -owner of '88 300 SE. I followed this whole thread. Very informative from everyone. Would my car have the same x-27 test point, or another similar type test point? If so, where would I find it? I still have no repair manual.
Thanks for ALL the great info...............This site is awsome

Should have X27, but location may be different than 124 ...Check just to the left of the brake reservoir...it will be the VI/WT wire on a 3 wire connector block, if it is there.

Thanx Mr. Dalton. I'll check it out in the am.......

X27 and Archieves
 

Mr. Dalton
I recently joined this site. I have read several post recently where you have mention that the information you are giving on the no crank problem is contained in the archieves. How can I find your writeup on this subject? I have a 1993 300ce that I am having a "no crank" problem with. Can you give me more details on what the x27 connector looks like?

Just search " X27"

X27 search
 

Mr. Dalton,
As stated, I am relatively new to the site. When I do a search of x27, I get 30+ threads that appear. Is your write-up in a thread or the DIY section? I am just trying to understand what I am looking for. Thanks

I will have a tutorial in many of those threads with my Name on it.
There are at least a dozen of them and they will be clear and concise, step by step...and I don't want to do them again when they are there already.

X27 Search
 

Mr. Dalton,

Yes, I have read many of your posts on this subject. I will do the research and pull the necessary information from your previous posts. I just didn't know if there was a single writeup I should be searching for in the archieves. Thanks

Very Good

If you have a problem after reading how it works, post and I will run thru it w/you....