PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Power Window Problem, '94 E320 Sedan (http://www.peachparts.com/shopforum/tech-help/248151-power-window-problem-94-e320-sedan.html)

marko57 03-21-2009 08:40 PM

Power Window Problem, '94 E320 Sedan
 
1994 E320 Sedan, with 158K.

I've had a problem with the drivers power window for some time. At first, the wind started whistling at the top, and I thought I needed a new seal.

Then, it began sounding like a cogged belt was slipping on a nylon gear down in the regulator system, and the wind noise got louder.

Now, the window won't close without leaving a tiny gap at the top, and the 'cogged belt slipping' sound', is weakening to more of a muted rattle.

I havn't seen a diagram of the regulator and motor, but the sound is so distinctive, I thought someone out there might have an idea of what it likely is.

For now, I've applied a nav system suction cup to the window, and am able to lift it tight now and again while running the motor up.

Any help would be much appreciated.

Mark

marko57 03-21-2009 09:55 PM

No worries. Found exactly what I was looking for right here!

http://www.mbclub.co.uk/forums/showthread.php?t=9172

Arthur Dalton 03-21-2009 10:02 PM

They all wear the last row of gear teeth out b/c guys hold the lift button too long after the window is up.


..or the owner does a lot of Drive Up Widow eating.....:)

" Fries wit dat ??? "

marko57 03-21-2009 10:25 PM

..or the owner does a lot of Drive Up Widow eating.....:)

" Fries wit dat ??? "


Dat be me!

Arthur Dalton 03-21-2009 10:29 PM

LOL


Most of those "Fries Wit Dat ?? " guys have upgraded their Employment and are now the guys at the "Parts Counters " !!!

Arthur Dalton 03-21-2009 10:49 PM

Quote:

Originally Posted by marko57 (Post 2146528)
..or the owner does a lot of Drive Up Widow eating.....:)

" Fries wit dat ??? "


Dat be me!

http://video.google.com/videoplay?docid=-8163714371150472213&sourceid=

Cal Learner 03-22-2009 10:10 AM

Quote:

Originally Posted by Arthur Dalton (Post 2146550)

Aaaaaaghh! Can't wait till these guys upgrade their employment to the parts counter.


All times are GMT -4. The time now is 12:59 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website