W126 91 300SE ignition switch
In my 91 300SE, there's a hollow between the ignition switch and the bezel. I can fully insert the key all the way around. In my 81 300SD, there's a rubber 'curtain' filling this gap. Can folks with a later W126 describe the space between the ignition switch and the inner circumference of the bezel?
Thanks, Sixto 91 300SE 81 300SD |
You are missing the rubber sleeve.
|
Is that a separate piece or part of the bezel or switch?
How does the bezel come off? Thanks, Sixto 91 300SE 81 300SD |
Its part of the black plastic bezel piece that mounts to the dash. I have one I need to replace cuz its missing the rubber, just like you, but I have not figured out if it is replaceable without removing the dash. Once the rubber seperates from the bezel, there is no putting it back on.
|
All times are GMT -4. The time now is 06:34 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website