![]() |
Spark Plug Removal Made Easier
Well it has been 80K miles and 7 years since I last replace my spark plugs.
Thanks to anti-seize compound on the plug threads and dielectric grease on the boots (the last time I replaced the plugs) the plugs came out with a little force. It was much better then the original plugs which I replaced at 80K miles/4+ years which I had to struggle getting not only the boots off but also fought with the plugs the entire way out. Needless to say I put anti-seize and dielectric grease on the new plugs. |
Just don't use your torque wrench to tighten to published specifications because you'll overtighten.
http://www.boschautoparts.com/NR/rdonlyres/E2F7DCC0-7876-4184-9F58-5F4FD984DA81/0/TighteningTorque.pdf |
All times are GMT -4. The time now is 10:21 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website