![]() |
euro triangle clip
how on earth is that little clip removed from the trunk? I found a sweet triangle today, but i couldnt get the clip off.
|
prying
It's hard to describe - but the "feet" of the holder go into the holes and then it slides sideways until one tab locks into a hole - I've removed them before by carefully prying above the tab with a thin small screwdriver while sliding it sideways.
And there are different foot configurations - I had one I pulled out of a w123 that would not fit the feet holes of the w124 - I have a nice triangle I wanted to mount in my 300E trunk and guess I will have to order it from the dealer cuz I haven't found one yet. John in San Antonio |
The one I removed yesterday had a little "tab" that clips into a hole, keeping the 4 feet in their respective holes. A pain to get out but I managed to get it off. I don't have a triangle though. :o
|
All times are GMT -4. The time now is 05:10 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website