Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 10-23-2001, 03:30 AM
Posts: n/a
Passenger rear leaning lower than other three corners.

I was wondering if anyone knew why my car is like that. I have HR springs and the only problem is that the passenger rear tends to sit about half to one inch lower than the other side. I replaced new shocks about a month ago but this problem has been there for quite awhile. What should I do should I put a thicker pad to make it better or could it be something like the control arm?
Reply With Quote
Old 10-23-2001, 08:09 AM
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
Spring height & pressure = ride height! If one corner is too low then that spring is shorter or weaker. If you can, install a spring pad that is 2 sizes thicker than the one in there now.
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
Old 10-23-2001, 10:30 AM
Posts: n/a
Thanks I'll check it out this friday and probably add that extra height. Thanks again
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear Passenger Light BadBenz94 Tech Help 1 08-22-2003 09:53 AM
Passenger side rear window stopped working Ducati Diesel Discussion 9 06-03-2003 08:37 AM
560SEC Left Side lower than Right Side LJADJA Tech Help 0 08-22-2001 06:57 PM
Benzmac...made rear camber adjustments for the 400E!!! Pbalias Tech Help 2 04-03-2001 08:32 PM
'90 300se Rear Sags kevinjh Tech Help 4 05-09-2000 09:32 AM

All times are GMT -4. The time now is 10:00 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page