How do I change the fog light lens 03 CLK 320
 

Ok, first of all, I am just looking for a basic explaination of what has to come off or moved to get at the lens. All I have done is ordered and received the new lens. I havent even looked at the lens out of the box yet. What my concern is is that the front bumper looks to pretty much enclose the fog lens and there is no way to access the lens or the lamp assembly from the front. I am guessing the filler panel under teh bumper will come off and give me access to the lamp? If anyone has done this before, just drop me a quick expalination of what has to come off to get at the assembly. I am not excited about removing the whole front bumper just to replace the lens. I am hoping the panel under the front corner of the bumper is an access panel.

E320 FOG LIGHTS
 

E320 2001 57K

REMOVE THE OIL COVER AND FRONT COVER UNDER AUTO. YOU SEE THE FOG LIGHT, REMOVE THE TWO SCREWS LEFT & RIGHT SIDE OF LIGHT, PULL DOWN AND REMOVE THE 3 CLIPS, POP THE LENS OFF AND INSTALL DIY MAYBE .3 HR

thanks
 

Thanks, for the post.
I had hoped it was as simple as removing the covers and exposing the mounting for the lamp. I just havent had time to get under there and look yet.
thanks