|
OBD Code Reader
Which code reader will my 1992 300SE use the OBD I or OBD II? Which model would you suggest? Just looking for a DIY model not a professional one.
|
OBD I. OBD II started in MY 1996.
|
|
2 Attachment(s)
Thanks guys!!!
Aurher - I will go ahead and try to build my own however, I've seen two renderings of the drawing. One has a 0.5 amp fuse and fuse holder on the yellow lead and one does not. How important is the fuse and what is it protecting? |
Some put it there for polarityprotection, but it is not needed b/c the diode is foward biased ..so it can not be hooked up wrong and if the diode opens , there is no circuit.
If you want it , put it in the pos side of the circuit. |
Arthur - Thanks for the fast reply and sorry for butchering you name!
|
| All times are GMT -4. The time now is 07:28 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website