Help change my battery
I need to put a new battery in my '83 300SD. I do not see any clamps that hold down the battery, yet I can't get it to budge. What's the secret to removing the battery?
|
There are clamps in the front, they are small and there (should be) two of them. Each are held in place with a 10mm nut on a stud built into the battery tray. If they are gone then its probably just stuck to the tray, the battery does weigh about 50lbs....
|
On the front edge of the battery tray, two little metal wedges, each held by a bolt with about an 11 or 12 mm head. Sometimes rusty and hard to get out.
|
10, 11, or 12mm, its one of those sizes. :D ;)
|
All times are GMT -4. The time now is 05:28 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website