![]() |
A/C clutch won't ingage.
2 Attachment(s)
Which one is the low pres switch? I jumped them both and the clutch did not engage.
|
The red one with the pigtail leads is the temperature switch. The pressure switch has the 1/4" spade connectors jutting out of it.
Check that you are getting power to the switch. If so, check at the clutch. |
The red one is the high pressure switch, but that won't engage the clutch, that's for low aux fan speed. The other one is the low pressure switch for the compressor.
|
Just started car and the clutch kicked in.Added one can of R-12 and the bubbles in the sight glass cleared up. Thanks for the help
|
How did you get R-12?
|
Quote:
I have one can left. |
r-12
I got 4 cans too!
|
Quote:
There are any number of websites where you can go and take an open book test in a matter of an hour or two and obtain an EPA 609 license. You can then legally buy all the R12 you can afford. Try IMACA.ORG Theirs used to cost only $15. |
| All times are GMT -4. The time now is 09:56 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website