w124 '92 dead electric seats
 

hi all, decided to do the strip/clean as per the site. lo and behold they are different :mad: pulled the covers of easily then remeber to take that little plastic circlip off underneath the seat bottom lever! or the cover wont budge (took me a while to notice that:confused:) secured it to a nice bit of wood to be safe. got the cover off but no bbs just 3 springs for the memory buttons (i noticed that mem1/2 have yellow leds that the springs sit on. then i see that all the levers are enclosed in 4 seperate little boxes (could not open these) and the board they are on wont budge. drivers side had 2 plugs so cleaned the contacts and replaced/passenger side has 4 plugs :confused: not 2. did the same there as well AND replaced the 2 fuses with fresh. fingers crossed nup still dead any suggestions ....is there a relay thing for these i can replace, ps they have worked previously although when they did was random sometimes one sometimes both:confused:. feedback appreciated :)

If you will translate that into English, I'd be happy to help. I'm really not sure what you are asking. I repaired my 124 seats a couple years ago. I think I remember most of it.

I'm going by the title of your thread, and making an assumption that your power seats aren't working, and you want some help in getting them to work again. If so, there are both fuses and relays that are part of the power seat circuits. Check fuses 2, E and F. Check relays K5 in location A and K24 in location F of the relay area at the back of the main fuse box.

If the seats did work sporadically, it sounds like the switches just need to be cleaned. Your post is quite hard to read.