Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-06-2001, 07:39 PM
scuba
Guest
 
Posts: n/a
Fuel Pressure Damper

Ok everybody, I know that I probably get on your nerves but I'm about ready to pull my last couple of hairs out.
My 1980, 450SL still won't start after replacing about everything I can think of.: new fuel injectors, plugs and cables, cold start valve, distributor and cable from ignition module to distributor.
I installed the new fuel injectors today with new spark plugs and as I turned the ignition key, the car almost started for about 3 second and then it was all over again. When I took a couple of spark plugs out and checked them, there where pretty wet. I checked my timing as good as I could and it seems it is alright and so is the time when the injectors spray in the cylinders.
My little Benz run before and then it just suddenly quit after not being driven for about 4 weeks.
Is it possible that my Fuel Pressure Damper is gone bad ? because that's the only thing I haven't replaced jet.
Does anybody knows how this thing works?
The Bosch # on it is 0 280.161.007 .
When I blow thru the hole where the fuel line hooks up to, there is no resistant at all................is that the way it's suppose to be? and what's the function of the vacuum hook-up on it.
Thanks for any input I get.
If I don't get this car started soon I my have to have a big yard sale.............LoL.

Gunter

Reply With Quote
  #2  
Old 11-08-2001, 08:00 PM
scuba
Guest
 
Posts: n/a
Fuel pump relay

First I like to thank Benzmac for taking the time and talking to me, thanks to him I finally have half of my problem solved.
I took my Fuel pump relay out and my little Benz started and purred like a little kitten..........until it run out of fuel. I did this test three times and the car started every time. After I installed the relay back in the car, my spark plugs started flooding again and the car wouldn't start. Then I left the relay in the vehicle and turned the ignition on and left it for about 15 minutes and then tried to start, but it was still flooding.
Now my question is; is the problem in the warm-up regulator or the fuel distributor ?
It seems like this problem started after I installed a new fuel filter.
Thanks everybody for your advise

Gunter

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
fuel pressure & pump action afmcorp Tech Help 3 07-01-2010 08:48 PM
Fuel Accumulator OR fuel pressure regulator everlyne Tech Help 2 01-05-2005 04:12 AM
Mechanical Fuel Injection Pump not working properly M_Anker Vintage Mercedes Forum 12 06-06-2004 12:40 PM
Fuel pressure from Lift Pump ? Jimmy Joe Diesel Discussion 3 05-15-2004 05:54 PM
Best diesel fuel stations? Cetane levels. Premium diesel. (long) BoostnBenz Diesel Discussion 19 07-13-2003 01:18 AM



All times are GMT -4. The time now is 06:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page