|
|
|
#1
|
|||
|
|||
88 300sel "no brake lights"
hello
this is a weird problem, i have no power to the brake switch under the dash. all bulbs, fuse's good. all other lights work. exterior light out bulb on dash does not come on, but works on ignition switch. cruise works but will not dis engage with brake pedal. i have removed the lighting control module, didnt see anything obvious. question, does power come to the brake switch before it goes to the light control module? where does it come from? fuse #6 is good. thanks mark
__________________
85 300 sd 168k current driver 85 300 sd parts 81 380 sl 125k 84 190 d 160k just bought! |
#2
|
|||
|
|||
Power to the brake light switch comes straight from fuse #6. If you only looked at the fuse go ahead and replace it and see what you get.
|
#3
|
|||
|
|||
problem was operator error brake switch is bad, all is well. i had a hard time getting myself up under the dash to check it. thanks, mark
__________________
85 300 sd 168k current driver 85 300 sd parts 81 380 sl 125k 84 190 d 160k just bought! Last edited by mgerdes; 10-10-2009 at 11:25 AM. |
Bookmarks |
|
|