PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   1991 500 SL Knock Sensor Wiring Harness (http://www.peachparts.com/shopforum/tech-help/262157-1991-500-sl-knock-sensor-wiring-harness.html)

jgl1 09-29-2009 04:37 AM
1991 500 SL Knock Sensor Wiring Harness
 
1991 500 SL - this vehicle utilizes two knock sensors, which are connected via a wiring harness to the ignition control module. The insulation for the wires in this harness has deteriorated, leaving larges areas of exposed bare wire.

The harness can be easily unplugged from the control unit... is it safe to run the engine with this harness unplugged, until the harness can be replaced?

mbdoc 09-29-2009 08:06 AM
Use some tape & tape the exposed wires.

Only a 5V reference voltage signal from EZL.


All times are GMT -4. The time now is 07:06 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website