|
|
|
#1
|
|||
|
|||
Rear rotors 94 s320
Have to change rear rotors on 94 s320. Can't get the rotor off. Its loose but the parking brake shoes are not releasing enough. Any ideas on how to remove rotor without trashing the parking brake shoe assembly.
|
#2
|
|||
|
|||
On that car you need to reset the automatic adjuster on the parking brake cable UNDER the car...above the drive shaft.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
Thanks Doc...will try that when I get back at it after Breakfast this morning.
|
#4
|
||||
|
||||
MB Doc
Do you know if a set of rotors and pads from an S320 will fit on E320 Base?? (not 4matic or wagon)
__________________
We did not inherit the earth from our parents, it is on loan from our children. |
#5
|
|||
|
|||
No I personally don't know if they will fit. I got mine off with some wheel puller persuasion. Inside of rotor drum area totally seriously rusted....shoes were hanging up.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|