drivers window not working e300 w210
i don't know the thing just stopped. I swapped out a different window switch board with my old mans (he has a 98 e300) and that didnt fix it. I am getting a clicking sound coming out of the drivers door when i hit the switch. I pulled teh panel and there is a little plastic box with connectors going to it thats clicking...i swapped that out with another known good unit and it still didnt fix it.
anybody have any ideas? I already changed out a rear regulator once, but I dont think this is that problem as it just stopped working for no reason. |
When there is a network on computers that must "talk" & even 1 computer has a problem IT will cause issues with any of the other computers.
You need to find who on the network has the problem. Testing the HI/LOW voltage signals is the only way to locate the issue. |
The first thing I would try is using the remote to lower and raise the windows. Just hold lock or unlock button while pointing the remote directly at the drivers exterior door handle for a few seconds after the lock cycles. If no go from there try rebooting the computers......disconnect the battery cable for a few minutes, then reconnect and see what happens. If nothing...Then let the troubling shooting begin.
:chef: |
Quote:
|
If you have a digital VOM & understand voltage testing/??? send me an e-mail.
|
All times are GMT -4. The time now is 01:58 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website