|
|
|
|
|
#1
11-14-2001, 02:06 PM
|
|||
|
|||
|
Car will not go back in reverse
I have a 1980 MB 300SD. On flat surface, when put into revese, the car will not go back unless I press the gas pedal for about 30-40 seconds until some pressure is built up and then it will go back. Would you please tell me what is wrong with my car and what parts need to be replaced?
Thank you, Ali Zadeh 
|
|
#2
11-14-2001, 02:14 PM
|
|||
|
|||
|
Reverse
The bore that the reverse piston lives is worn,when reverse is applied the fluid passes around the piston. When you raise the engine speed you also increase flow volume and some times the piston will move.
sometimes a new seal ring will help. MF
|
|
#3
11-14-2001, 05:33 PM
|
|||
|
|||
|
This trans has an adjustable reverse band!~ Many times the adjustment bolt will back out & then NO reverse. This bolt is on the RIGHT side of the trans just above the kickdown solenoid.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| W123 versus E320 CDI | unkl300d | Diesel Discussion | 31 | 09-29-2004 09:51 PM |
| Beautiful 2 owner 240D for sale - DC area | tenknots | Mercedes-Benz Cars For Sale | 5 | 09-09-2004 11:02 AM |
| nice 1969 300SEL 6.3 for sale, Portland OR | gerryvz | Mercedes-Benz Cars For Sale | 0 | 06-23-2003 06:09 AM |
| Starting Problem | Jon Hrut | Tech Help | 12 | 01-24-2003 05:11 AM |
| intermittent no starting 420SEL | david74mr | Tech Help | 19 | 11-12-2002 10:23 AM |
Linear Mode
