|
|
|
|
|
#1
11-24-2009, 11:29 PM
|
||||
|
||||
|
300E 1986 Fuel Injector Holder PN
Anybody know the OE part number of the metal clamp that is used to hold down the injector seals in a W124 1986 300E 103 engine? I know the style was changed in later models, not sure what year. Mine has 5 clamps of one style, and one that is different. Please see pics for more details.
Right now I've got five older (original) style seal holders, and one newer style holder. I know the newer style was not meant to be used for the seals used in my injectors because the seal where that newer holder was installed had obvious signs of uneven pressure points on the contact surfaces between the two.
__________________
300E 1986 - 117KMi Sikkens Metallic Azurite Blue Member #120 of MB Club VE Caracas, Venezuela 
|
|
#2
11-24-2009, 11:41 PM
|
||||
|
||||
|
The part number for the original clamp is: A1030780341
__________________
-diesel is not just a fuel, its a way of life-  '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k)
|
|
#3
11-25-2009, 08:49 AM
|
||||
|
||||
|
Vielen dank, thank you very much.
By any chance would you happen to know the PN of the screw that attaches this clamp to the manifold? It's a 5mm hex head screw. I had to chisel one out that had been tightened way too hard, and destroyed it's head in the process.
__________________
300E 1986 - 117KMi Sikkens Metallic Azurite Blue Member #120 of MB Club VE Caracas, Venezuela Last edited by azurite300E; 11-25-2009 at 12:41 PM.
|
|
#4
11-25-2009, 11:34 AM
|
||||
|
||||
|
Quote:
1) 103-078-00-43 if your engine serial number is up to 061402 OR 2) 103-078-05-43 if your engine number is 061403 or higher. The part number for the screws that hold the injector clamps to the intake manifold is N000912-006004. Six of those screws are required.
__________________
1988 California version 260E (W124) Anthracite Grey/Palomino Owned since new and still going strong and smooth MBCA member Past Mercedes-Benz: 1986 190E Baby Benz 1967 230 Inherited from mom when she downsized 1959 220S Introduced me to the joys of keepin' 'em goin' There are only 10 kinds of people in the world--those who understand binary and those who don't
|
|
#5
11-25-2009, 12:35 PM
|
||||
|
||||
|
My engine is 12-027nnn, so then it seems the correct part number should be 103-078-00-43.
Thanks for your input!
__________________
300E 1986 - 117KMi Sikkens Metallic Azurite Blue Member #120 of MB Club VE Caracas, Venezuela
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
