Annoying Rattle Fixed
I have had an annoying rattle in my 300E since I purchased it 6 years ago. It seemed to come from the front and only happened when I hit a sharp bump at low speeds. It was a very solid clunk sound that I could not seem to isolate in the garage. A post about the impact strip on the rear
bumper comming loose got me to thinking that might be the problem so I removed the bumper only to find the impact strip was properly attached but the foam blocks inside the bumper assembly have dried out and shrunk enough that they can move about when a sharp bump is hit. I used RTV to attach them to the bumper cover and my rattle is now gone. :) :) :) |
gluteus maximus glued................
Thanks for the anecdotes, keep on posting!!
|
All times are GMT -4. The time now is 09:54 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website