89 300TE, replaced the master cylinder because of a spongy brake pedal, bench bled the master, and then after install bled all 4 wheels, still have spongy feel in brake pedal, abs is working and no warning lights. Does it sound like I have a defective rebuilt master?
Thanks, Kchemers

__________________
'05 Ford Escape 100,000 miles
'87 560SL 92000 miles
'89 300TE 199,000 miles
'02 Audi TT 100,000 miles
'00 Ford Excursion V-10 121000 miles
'92 Mercury Capri 100000 miles
'02 BMW 325XI 60000 miles
'92 230CE 160000
'87 BMW 535SI 160,000 miles
'93 Rinker Captiva 209
5 Kids
2 Dogs
1 Wife

Are the hoses old?

__________________
Prost!

yes hoses are original

__________________
'05 Ford Escape 100,000 miles
'87 560SL 92000 miles
'89 300TE 199,000 miles
'02 Audi TT 100,000 miles
'00 Ford Excursion V-10 121000 miles
'92 Mercury Capri 100000 miles
'02 BMW 325XI 60000 miles
'92 230CE 160000
'87 BMW 535SI 160,000 miles
'93 Rinker Captiva 209
5 Kids
2 Dogs
1 Wife

My car is 10 years old and it could probably benefit from new hoses. I don't know of any specified replacement interval, but one check is to feel for expansion while applying the brakes.

__________________
Prost!

Id go one step further and flush the old fluid. Do the system thru each wheel.
You will be amazed how much junk will come out.

__________________
1985 300D 198K sold
1982 300D 202K
1989 300E 125K
1992 940T

"If you dont have time to do it safely, you dont have time to do it"

"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."