|
|
|
|
|
#2
11-23-2001, 12:30 PM
|
||||
|
||||
|
Can't say for sure on your 560, but on the 4.5 the pressure fitting was a 17mm, return line was clamped and mounting bolts were mostly 14mm, with an odd 13mm hidden behind the pump. Reservior was attached to the pump with a 14mm allen.
Hope this helps.
__________________
Mike Tangas '73 280SEL 4.5 (9/72)- RIP  Only 8,173 units built from 5/71 thru 11/72 '02 CLK320 Cabriolet - wifey's mid-life crisis 2012 VW Jetta Sportwagon TDI...at least its a diesel Non illegitemae carborundum. 
|
|
#4
11-24-2001, 12:54 PM
|
|||
|
|||
|
Get a 17, 19, 22mm and you should have no problems.
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Careful Using Stringtrimmer Line - Sunroof Drains | BrierS | Tech Help | 4 | 09-01-2004 08:11 PM |
| '77 450 SEL Euro; 4.5; Vacuum line problem!!!! | bobboyer5 | Vintage Mercedes Forum | 1 | 11-21-2003 07:28 PM |
| You CAN replace oil cooler line without removing the motor mount. | GregS | Diesel Discussion | 13 | 02-12-2003 12:29 AM |
| Cannot find vacuum line connection | awfrance | Tech Help | 9 | 08-19-2002 08:42 AM |
| 82 300TD A/C problem | benchracer | Diesel Discussion | 15 | 06-16-2001 08:50 PM |
Linear Mode
